Typical Values For Terminal Status Parameters; Table 10: Terminal Status Parameters - Typical Values And Range - Hughes HN9500 User Manual

Chapter 2

Typical values for Terminal Status parameters

Parameter
LAN Interface Status
Dial Backup Status
TCP Acceleration Status
Turbo Page Status
SSL Acceleration Status
HN9500 Satellite Router User Guide
30
1037737-0001 Revision E
• TCP Acceleration Statistics – Counts of messages and connections used between the satellite
router and its destination if the feature is enabled. (Some listed features may not be included
in your service plan.)
• SSL Acceleration Statistics – Counts of SSL traffic if the feature is enabled. (Some listed
features may not be included in your service plan.)
• DNS Caching Statistics – Counts on local storage of data if the feature is enabled. (Some
listed features may not be included in your service plan.)
• Management Statistics – Various internal network management traffic counts.
• Turbo Page Statistics – Counts of various web page requests and objects if the feature is
enabled. (Some listed features may not be included in your service plan.)
The following table lists typical values and the range of values for parameters on the Terminal
Status page. This information may help you understand the values displayed by your satellite
router.
To see the definition of any parameter, click the parameter name on the screen.
The Dial Backup Status parameter and Dial Backup Status category of parameters apply to the
optional VADB feature, which is set up and enabled on your satellite router only if you or your
organization ordered it.
Table 10: Terminal Status parameters – typical values and range
Typical values
Overall Status (parameter category)
Up Up
Down
Out of Service
Maintenance
Unknown
Disabled Disabled
Connected
Connecting: ...
Disconnecting: ...
Disconnected: ...
Enabled Enabled
Disabled
Enabled Enabled
Disabled
Disabled Disabled
Connected to Server
Connecting to Server
Disconnected from Server
System Control Center
Range of values