Table of Contents
Advertisement
Chapter 9
Typical values for System Status parameters
Parameter
Receive Signal Strength (value is
not displayed until about 2 minutes
after certain events such as router
re-boot or antenna repointing)
Normalized Power Word (value is
not displayed until about 2 minutes
HN9500 Satellite Router Installation Guide
74
1037736-0001 Revision G
Figure 48: System Status page
The operational parameters listed on the System Status page are shown in a tabular format. The
first (left) column identifies the parameter categories:
• Satellite Interface – Contains information on the receive status and signal strength, as well
as error messages related to satellite router receive information.
• Administrative States – Contains information on software downloads to this satellite router,
security keys, and other administrative functions.
The following table lists typical values and the range of values for parameters on the System
Status page. This information may help you understand the values displayed by a customer's
satellite router.
To see the definition of any parameter, click the parameter name on the screen.
Table 11: System Status parameters – typical values and range
Typical values
Satellite Interface (parameter category)
160–220
0–255.
29–45
20–65.
System Control Center
Range of values
Advertisement
Table of Contents
Troubleshooting
