Commissioning Activities And Progress Messages; Table 5: Commissioning Progress Messages - Hughes HN9500 Installation Manual

Commissioning the satellite router

Commissioning activities and progress messages

Phase (activity)
Self Test
Satellite Downlink
Signal
Commissioning
Software
Satellite Uplink
Signal
Receive Satellite
Information
Registration Process
All possible progress (or status) messages for each commissioning activity are shown in
5: Commissioning progress messages
to Table 8: Guidelines for installation troubleshooting

Table 5: Commissioning progress messages

Progress messages
indicating normal progress
Passed
Acquiring
Acquired
Waiting for System
Information
Downloading beginning...
Download Completed
Please wait for next broadcast
of Software in {number}
mins...
Acquiring Signal
Acquired
Receiving Data
Complete
Registering
Registered
on page 35. If a status message indicates a problem, refer
on page 39.
Possible error messages
Attempting to acquire downlink signal in microcell
{number}, retry # {number}
Downlink signal acquisition failed, retry # {number}
Final cell selection failed. (This message could mean
you are trying to install the router in a location that is
outside the network service area. Corrective action:
Make sure you entered the correct latitude and
longitude on the Installation Parameters screen.)
Uplink signal acquisition failed (Ack attempt #
{number})...
Attempting Probing (attempt # {number}) ...
Probing failed (attempt # {number})...
Probing Failed: Downlink Signal Lost
Corrective actions:
Make sure the transmit cable is connected. (Pointing
completion verifies the receive cable connection.)
b) The Lat/Long values entered in the Installation
Parameters screen are not correct for the site. Probing
is quite sensitive to the accuracy of these values,
whereas pointing is not as sensitive.
Registering (attempt # {number})...
Unable to register...
Registration Failed ...
HN9500 Satellite Router Installation Guide
1037736-0001 Revision G
Chapter 5
Table
35