Typical Values For Reception Information Parameters; Table 13: Reception Information Parameters - Typical Values And Range - Hughes HN9500 Installation Manual

Chapter 9

Typical values for Reception Information parameters

Table 13: Reception Information parameters – typical values and range
Parameter
Receive Status
Receive Signal Strength
CONUS SNR
PTP SNR
HN9500 Satellite Router Installation Guide
78
1037736-0001 Revision G
Figure 49: Reception Information page
The operational parameters listed on the Reception Information page are shown in a tabular
format. The first (left) column identifies the parameter categories:
• Satellite Interface Statistics – Contains information on the receive status and signal strength,
as well as error messages related to satellite router receive information.
• Traffic Statistics: Receive – Contains statistical information on data received from the
satellite including number of packets received or dropped, etc.
The following table lists typical values and the range of values for parameters on the Reception
Information page. This information may help you understand the values displayed by a customer's
satellite router.
To see the definition of any parameter, click the parameter name on the screen.
Typical values
Satellite Interface Statistics (parameter category)
Up Up – The router is receiving signals
from the satellite.
Down – The router is not receiving
signals from the satellite.
160–220 0–255.
16 4.5–18.0.
14 4.5–18.0.
System Control Center
Range of values