Chapter 9
HN9500 Satellite Router Installation Guide
82
1037736-0001 Revision G
Figure 51: Terminal Status page (top part)
The operational parameters listed on the Terminal Status page are shown in a tabular format.
The first (left) column identifies the parameter categories:
• Overall Status – Shows the major features such as dial backup or acceleration. (Some listed
features may not be included in your service plan.)
• Transport Interface Receive Statistics – Indicates messages received and decoded by the
satellite router from the satellite.
• Transport Interface Transmit Statistics – Indicates messages being queued up by the satellite
router for transmission to the satellite.
• LAN Interface Statistics – Shows traffic across the LAN interface to the satellite router.
• IP Forwarding and Routing Statistics – These refer to system control messages.
• Local IP Interface Statistics – Sum of various counts of messages.
• Dial Backup Status – Count of dial backup traffic if the VADB feature is enabled. (Some
listed features may not be included in your service plan.)
• TCP Acceleration Statistics – Counts of messages and connections used between the satellite
router and its destination if the feature is enabled. (Some listed features may not be included
in your service plan.)
• SSL Acceleration Statistics – Counts of SSL traffic if the feature is enabled. (Some listed
features may not be included in your service plan.)
• DNS Caching Statistics – Counts on local storage of data if the feature is enabled. (Some
listed features may not be included in your service plan.)
• Management Statistics – Various internal network management traffic counts.
• Turbo Page Statistics – Counts of various web page requests and objects if the feature is
enabled. (Some listed features may not be included in your service plan.)
System Control Center