State Codes On Status And Information Screens; Figure 45: Format Of Status And Information Screens; Figure 46: Example Of A State Code - Hughes HN9500 Installation Manual

Chapter 9

State codes on status and information screens

HN9500 Satellite Router Installation Guide
72
1037736-0001 Revision G
• System Status page
• Reception Information page
• Transmission Information page
• Terminal Status page
• System Information page

Figure 45: Format of status and information screens

Each status and information screen contains categories of parameters that relate to various aspects
of satellite router operation, as explained in the sections that follow for each status and information
screen. To see a definition of any parameter, click the parameter name. The definition appears
in a pop-up window. For many parameters this window also includes additional information. If
you do not see the pop-up window, it may be hidden by other windows; in this case, minimize
other open windows.
Count values such a count of errors or packets received may start at or revert to zero when they
reach a maximum number or if the router is restarted.
A state code is a number that indicates the operational state of the satellite router. State codes
are displayed with an explanation in words, as shown in the following example. On the System
Control Center status and information screens, state codes are shown next to selected parameters,
as shown in

Figure 46: Example of a state code

to an error condition.
Figure 46: Example of a state code
System Control Center
on page 72, or next to a parameter that is related