Viewing The State Codes List - Hughes HN9500 Installation Manual

System Control Center
State code State name
31 ECL Active
32 Barred
33 Suspended
34 Maintenance
35 Out of Service

Viewing the state codes list

the satellite. State code 30
indicates a percentage of bad slots
within the last hour that exceeds a
preset value.
Transmitter has been shut down
due to ECL. ECL measures total
transmitted power over 30 minute
periods and turns off the transmitter
if the total power exceeds a preset
limit imposed by the FCC.
Restricted states (NOCC-imposed restrictions)
Router has been barred from
transmitting by the NOCC. Possible
reasons for barring include
interference isolation, uplink failure,
or government order.
Router has been put in a
suspended state by the NOCC.
This occurs if a customer's bill is
overdue or if service is terminated.
Router has been put in
maintenance state by the NOCC.
Router has been put in
out-of-service state by the NOCC.
To view a list of state codes with an explanation of each code:
1. Click the underlined state code number.
Explanation
clear weather, verify transmit
cabling and pointing. If antenna has
moved or been disturbed, repoint
it.
Transient – No action is necessary.
Call Installer Support with site
name to resolve the issue.
Call Installer Support with site
name to resolve the issue.
Call Installer Support with site
name to resolve the issue.
Call Installer Support with site
name to resolve the issue.
HN9500 Satellite Router Installation Guide
Chapter 9
Corrective action
1037736-0001 Revision G
91