VADB feature setup and testing
VADB troubleshooting
If you manually started VADB mode you must manually stop it or the router will remain in
VADB mode indefinitely.
The Stop Manual VADB command forces the satellite router to close any existing VADB
connection, whether it was manually or automatically initiated. After that the router
automatically selects VADB or air (satellite) operation, according to the router's configuration.
If you experience any problems while installing VADB, refer to the VADB troubleshooting
sections in
Troubleshooting
on page 97.
HN9500 Satellite Router Installation Guide
Chapter 8
1037736-0001 Revision G
63