Red Flag Indicator - Hughes HX90 User Manual

The parameters listed on each screen are explained in this guide in the section for
each screen:
• System Status page on page 26
• Reception Information page on page 28
• Transmission Information page on page 30
• System Information page on page 32

Red flag indicator

On the status and information screens, a red flag next to a value indicates a problem
related to the parameter listed in the same row where the flagged value appears. The
flagged value appears in the right column; the parameter appears in the left column.
The value indicates the current state of the parameter.
Figure 10: Format of status and information screens
Figure 11: Red flag problem indicator
Chapter 2 • System Control Center
1039457-0001 Revision A
25