State Codes On Status And Information Screens; Red Flag Indicator; Figure 13: Format Of Status And Information Screens; Figure 14: Example Of A State Code - Hughes HN9500 User Manual

System Control Center

State codes on status and information screens

Red flag indicator

Figure 13: Format of status and information screens

Each status and information screen contains categories of parameters that relate to various aspects
of satellite router operation, as explained in the sections that follow for each status and information
screen. To see a definition of any parameter, click the parameter name. The definition appears
in a pop-up window. For many parameters this window also includes additional information. If
you do not see the pop-up window, it may be hidden by other windows; in this case, minimize
other open windows.
Count values such a count of errors or packets received may start at or revert to zero when they
reach a maximum number or if the router is restarted.
A state code is a number that indicates the operational state of the satellite router. State codes
are displayed with an explanation in words, as shown in the following example. On the System
Control Center status and information screens, state codes are shown next to selected parameters,
as shown in

Figure 14: Example of a state code

to an error condition.
Figure 14: Example of a state code
For a list and explanation of all state codes, see
On the status and information screens, a red flag next to a value indicates a problem related to
the parameter listed in the same row where the flagged value appears. The flagged value appears
on page 19, or next to a parameter that is related
Table 12: State codes on page 35.
HN9500 Satellite Router User Guide
1037737-0001 Revision E
Chapter 2
19