Resizing Originals By Entering A Scaling Value (Mac Os) - Canon ImagePROGRAF iPF680 User Manual

iPF680
6
Click the Page Setup tab to display the Page Setup
sheet.
7
Select and click a roll paper in the
8
Select the width of the loaded roll in the
9
A
In the Page Size list, click the size of the original as specified in the application. In this case, click ISO A4.
10
C
Select the Enlarged/Reduced Printing check box.
11
Click ISO A4 in the
12
F
Click Scaling and enter 120.
• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and
right edges of the paper will not be printed.
Note
If the original size after enlargement or reduction is
•
smaller than the paper size, the original is printed in the
upper-left corner. In this case, you can center originals
by selecting
13
Confirm the print settings and print as desired.
• For tips on confirming print settings, see "Confirming Print Settings ."
Note

Resizing Originals by Entering a Scaling Value (Mac OS)

Resizing Originals by Entering a Scaling Value (Mac OS)

This topic describes how to enlarge originals before printing by entering a scaling value, based on the following exam-
ple.
Document: Any Type
•
User's Guide
L
Paper Source list.
M
Roll Paper Width list—in this case, ISO A2/A3 Roll (420.0mm).
G
Paper Size list.
E
Print Centered on the Layout sheet.
Resizing Originals by Entering a Scaling Value (Mac OS)
P.161
➔
73