Setting Control Panel Access Lock - Canon IPF850 User Manual

iPF850
TCP/IPv6
TCP/IPv6
Network Interface

Setting Control panel access lock

Setting Control panel access lock
This section describes the procedure for setting and releasing the control panel access lock.
•
The setting can only be changed in administrator mode.
Note
1
Start RemoteUI and log on to it.
Start the web browser and enter the following URL in the Location (or Address ) box to display the Remo-
teUI page.
2
Select Administrator Mode and click Logon.
•
If a password has been set on the printer, enter the password.
Note
3
Click Device Selection on the left side to display the Extended Functions page.
4
Click Edit at the top right to display the Change Extended Functions page.
User's Guide
Use a manual address
Use the same host name and do-
main name as IPv4
Perform dynamic updating of stateful addresses
Dynamically update the stateless address
Dynamically update the manual address
Frame Type
Use Zeroconf Function
MulticastDNS ServiceName
LPD Printing
IPP Printing
IPP Printer URI
RAW Printing
Raw Mode Bi-direction
Physical Interface
Transmission Rate
MAC Address
Auto Detect
Communication
Ethernet Type
Spanning Tree
Use the Jumbo Frame Function
http://printer IP address or name/
Input example: http://xxx.xxx.xxx.xxx/
Prefix Length
Default Router Address
Prefix Length
Primary DNS Server Address
Secondary DNS Server Address
DNS Host Name
DNS Domain Name
IPv6 settings values.
Network interface settings values.
Setting Control panel access lock
IPv6 settings values.
465