Adjustment/Maintenance
*
Asterisks (
)
Settings marked with an asterisk (
Display Timing for Cartridge Preparation Notification (P. 358)
Printer Density(P. 358)
Toner Save(P. 359)
Adjust Print Position(P. 359)
Special Processing(P. 360)
Clean Fixing Assembly(P. 362)
Display Timing for Cartridge Preparation Notification
Set the display timing for the message notifying you that the amount remaining in the toner cartridge is low.
Auto
Custom
1 to 20
to 99 (%)
<Menu>
<Custom>
Printer Density
Adjust the toner density to be used for printing.
Nine Levels
<Menu>
density
Setting Menu List
All the settings about adjustment and maintenance are listed with short
descriptions. Default settings are marked with a dagger ( ).
*
) are only available when the optional paper feeder (drawer 2) is attached.
<Adjustment/Maintenance>
Enter toner level
<Apply>
Adjusting Print Density(P. 433)
<Adjustment/Maintenance>
<Apply>
<Display Timing for Cartridge Preparation Notification>
<Printer Density>
Tap
358
0U6X-0A9
/
to adjust the toner