Adding And Removing Server Cluster Ports; Assigning And Modifying Server Cluster Mode - OmniSwitch os6900 Network Configuration Manual

Configuring High Availability VLANs
Deleting a VLAN
To delete a VLAN use the no form of the
number. For example, to delete high availability VLAN 10 enter:
-> no vlan 10

Adding and Removing Server Cluster Ports

The following subsections describe how to assign to and remove ingress ports from a high availability
VLAN with the server-cluster port
Assigning Ports to a Server Cluster
To assign server cluster ports to a high availability VLAN use the server-cluster port/linkagg command.
For example, to assign port 1/21 to server cluster "1", enter the commands as:
-> server-cluster 1 port 1/21
To assign linkagg "1" to server cluster "3', enter the commands as:
-> server-cluster 3 linkagg 1
Removing Ports from a Server Cluster
To remove server cluster ports from a high availability VLAN use the no form of server-cluster port/
linkagg command. For example,
-> no server-cluster 1 port 1/21
-> no server-cluster 3 linkagg 1

Assigning and Modifying Server Cluster Mode

The following subsections describe how to assign to and remove egress ports from a high availability
VLAN with the server-cluster
Assigning L2 Mode to a Server Cluster
To assign L2 mode to a high availability VLAN use the server-cluster id command. For example, to
assign "L2" mode to the server cluster "1", enter the command as:
-> server-cluster 1 mode l2
If you want a name to be assigned along with the cluster mode, enter the commands as:
-> server-cluster 1 name l2_cluster mode l2
Assigning L3 Mode to a Server Cluster
A cluster can be assigned an IP address and an ARP entry mac-address. Each cluster should have a unique
IP-address. IP address is configurable only for L3 clusters.
To assign L3 mode to a high availability VLAN use the server-cluster id command. For example, to
assign "L3" mode to the server cluster "2", enter the command as:
-> server-cluster 2 mode l3
-> server-cluster 5 port all
OmniSwitch AOS Release 7 Network Configuration Guide
vlan command by entering no vlan followed by the VLAN's ID
command.
command.
June 2013
Configuring High Availability VLANs on a Switch
page 5-7