Verifying 802.1Ab Configuration - OmniSwitch os6900 Network Configuration Manual

Configuring 802.1AB

Verifying 802.1AB Configuration

To display information about the ports configured to handle 802.1AB, use the following show command:
show lldp system-statistics
show lldp statistics
show lldp local-system
show lldp local-port
show lldp local-management-address
show lldp config
show lldp remote-system
show lldp remote-system med
show lldp remote-system application-tlv
For more information about the resulting display, see
OmniSwitch CLI Reference Guide.
OmniSwitch AOS Release 7 Network Configuration Guide
Displays system-wide statistics.
Displays port statistics.
Displays local system information.
Displays port information.
Displays the local management address information.
Displays the general LLDP configuration information for
LLDP ports.
Displays local port information of remote system.
Displays MED local port information of remote system.
Displays Application Priority TLV information of the
remote system.
Chapter 13, "802.1AB Commands,"
June 2013
Verifying 802.1AB Configuration
in the
page 13-11