Multiple Spanning Tree (Mst) Region Defaults - OmniSwitch os6900 Network Configuration Manual

Configuring Spanning Tree Parameters

Multiple Spanning Tree (MST) Region Defaults

Although the following parameter values are specific to MSTP, they are configurable regardless of which
mode (flat or per-VLAN) or protocol is active on the switch.
Parameter Description
The MST region name
The revision level for the MST region
The maximum number of hops autho-
rized for the region
The number of Multiple Spanning Tree
Instances (MSTI)
The VLAN to MSTI mapping
OmniSwitch AOS Release 7 Network Configuration Guide
Multiple Spanning Tree (MST) Region Defaults
Command
spantree mst region name
spantree mst region revi-
sion-level
spantree mst region max-
hops
spantree msti
spantree msti vlan
June 2013
Default
blank
0
20
0 (flat mode instance)
All VLANs are mapped to the
Common Internal Spanning
Tree (CIST) instance
page 6-5