Using Switch Logging
Switch Logging Defaults
The following table shows switch logging default values.
Global Switch Logging Defaults
Parameter Description
Enabling/Disabling switch logging
Switch logging severity level
Enabling/Disabling switch logging
Output
Switch logging file size
OmniSwitch AOS Release 7 Network Configuration Guide
CLI Command
Default Value/Comments
swlog
Enabled
swlog appid
Default severity level is info. The numeric
equivalent for info is 6
swlog output
Flash Memory and Console
swlog output
1250K bytes
flash-file-size
June 2013
Switch Logging Defaults
page 34-3