OmniSwitch os6900 Network Configuration Manual page 379

Configuring Multiple VRF
Total 1 interfaces
Name
--------------------+---------------+---------------+------+-------+--------
intfone
See the OmniSwitch CLI Reference Guide for information about the fields in the above displays.
An example of what the Quick Steps configuration commands look like when entered sequentially on the
switch:
-> vlan 100
-> vlan 101
-> vlan 102
-> vrf IpOne
IpOne::-> vrf IpTwo
IpTwo::-> vrf IpOne
IpOne::-> ip interface intf100 address 100.1.1.1/24 vlan 100
IpOne::-> ip interface intf101 address 101.1.1.1/24 vlan 101
IpOne::-> ip router router-id 1.1.1.1
IpOne::-> ip static-route 192.100.1.1/24 gateway 100.1.1.10
IpOne::-> ip load rip
IpOne::-> ip rip admin-state enable
IpOne::-> ip rip interface intf100 admin-state enable
IpOne::-> vrf IpTwo
IpTwo::-> ip interface intf102 address 102.1.1.1/24 vlan 102
IpTwo::-> ip router router-id 2.2.2.2
IpTwo::-> ip load bgp
IpTwo::-> ip bgp neighbor 102.1.1.10
IpTwo::-> ip bgp neighbor 102.1.1.10 remote-as 1000
IpTwo::-> ip bgp neighbor 102.1.1.10 admin-state enable
IpTwo::-> vrf IpThree profile low
OmniSwitch AOS Release 7 Network Configuration Guide
IP Address Subnet Mask
200.1.1.1 255.255.255.0
June 2013
Quick Steps for Configuring Multiple VRF
Status Forward Device
DOWN NO vlan 200
page 16-5