Creating And Deleting A Static Link Aggregate Group - OmniSwitch os6900 Network Configuration Manual

Configuring Static Link Aggregation
Note. Depending on the needs of your network you need to configure additional parameters. Commands
to configure optional static aggregate parameters are described in
Parameters" on page

Creating and Deleting a Static Link Aggregate Group

The following subsections describe how to create and delete static link aggregate groups with the
static agg size command.
Creating a Static Aggregate Group
To create a static aggregate group on a switch, enter linkagg static agg followed by the user-specified
aggregate number, size, and the number of links in the static aggregate group, which can be 2, 4, or 8.
For example, to create static aggregate group 5 that consists of eight links, on a switch, enter:
-> linkagg static agg 5 size 8
Note. The number of links assigned to a static aggregate group must always be close to the number of
physical links that you plan to use. For example, if you are planning to use 2 physical links you must
create a group with a size of 2 and not 4 or 8.
As an option you can also specify a name and/or the administrative status of the group by entering
linkagg static agg followed by the user-specified aggregate number, size, the number of links in the static
aggregate group, name, the optional name, admin-state, and either enable or disable (the default is
enable).
For example, to create static aggregate group 5 called "static1" consisting of eight links that is
administratively disabled enter:
-> linkagg static agg 5 size 8 name static1 admin-state disable
Note. If you want to specify spaces within a name for a static aggregate group the name must be specified
within quotes (for example, "Static Aggregate Group 5").
OmniSwitch AOS Release 7 Network Configuration Guide
7-9.
Configuring Static Link Aggregation Groups
"Modifying Static Aggregation Group
June 2013
linkagg
page 7-7