Dhcp Relay Defaults - OmniSwitch os6900 Network Configuration Manual

Configuring DHCP Relay

DHCP Relay Defaults

The following table describes the default values of the DHCP Relay parameters:
Parameter Description
Default UDP service
Forward delay time value for DHCP Relay
Maximum number of hops
Packet forwarding option
Automatic switch IP configuration for
default VLAN 1
Automatic switch IP configuration packet
type (BootP or DHCP)
Relay Agent Information Option
OmniSwitch AOS Release 7 Network Configuration Guide
Command
ip udp relay service
ip helper forward-delay
ip helper maximum-hops
ip helper standard
ip helper per-vlan-only
ip helper boot-up
ip helper boot-up enable
ip helper agent-informa-
tion
June 2013
DHCP Relay Defaults
Default Value/Comments
BOOTP/DHCP
3 seconds
4 hops
Standard
Disabled
BootP
Disabled
page 21-3