Configuring A Uni Profile - OmniSwitch os6900 Network Configuration Manual

Configuring VLAN Stacking Services
Use the show ethernet-service sap-profile
for the switch. This command also displays the attribute values for each profile.
Associating a Profile with a Service Access Point
After a profile is created, it is then necessary to associate the profile with a VLAN Stacking SAP. When
this is done, the current profile associated with a SAP is replaced with the new profile.
The ethernet-service sap sap-profile
SAP. For example, the following command associates the map_pbit profile to SAP 20:
-> ethernet-service sap 20 sap-profile map_pbit
Note the following when associating a profile with a VLAN Stacking SAP:
•
To change the profile associated with the SAP back to the default profile, specify "default-sap-profile"
for the profile name. For example:
-> ethernet-service sap 20 sap-profile default-sap-profile
Use the show ethernet-service sap
association for each SAP.

Configuring a UNI Profile

The ethernet-service uni-profile
profile determines how control frames ingressing on UNI ports are processed. For example, the following
command creates a UNI profile to specify that VLAN Stacking should discard MVRP frames:
-> ethernet-service uni-profile uni_1 l2-protocol mvrp discard
A default UNI profile, named "default-uni-profile", already exists in the switch configuration and is auto-
matically associated with a UNI port. Use the
default profile settings. For example:
-> show ethernet-service uni-profile default-uni-profile
Profile Name
-------------------+--------+--------+---------+---------+--------+---------
default-uni-profile
To delete a UNI profile, use the no form of the ethernet-service uni-profile command. For example, the
following command deletes the uni_1 profile:
-> no ethernet-service uni-profile uni_1
The show ethernet-service uni-profile command is also used to view a list of all profiles that are already
configured for the switch.
Associating UNI Profiles with UNI Ports
After a UNI profile is created, it is then necessary to associate the profile with a UNI port or a UNI link
aggregate. When this is done, the current profile associated with the port is replaced with the new profile.
The ethernet-service uni uni-profile
example, the following command associates the uni_1 profile to UNI port 1/1:
-> ethernet-service uni port 1/1 uni-profile uni_1
page 33-20
command to view a list of profiles that are already configured
command is used to associate a new profile with a VLAN Stacking
command to display the SAP configuration, which includes the profile
command is used to create a VLAN Stacking UNI port profile. The UNI
show ethernet-service uni-profile
Stp 802.1x 802.3ad
tunnel tunnel tunnel
command is used to associate a new profile with a UNI port. For
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring VLAN Stacking
command to display the
802.1ab MVRP
tunnel tunnel tunnel
AMAP
June 2013