High Availability Vlans Specifications; High Availability Default Values - OmniSwitch os6900 Network Configuration Manual

High Availability VLANs Specifications

High Availability VLANs Specifications
The table below lists specifications for high availability VLAN software.
Platforms Supported
Maximum high availability VLANs per switch
Switch ports eligible for high availability VLAN
assignment.
Switch port not eligible for high availability
VLAN assignment.
CLI Command Prefix Recognition

High Availability Default Values

The table below lists default values for high availability VLAN software.
Parameter Description
Server cluster admin state of the
server cluster
Server cluster id and mode
Mac address of the server cluster
IP address of the server cluster
Configure the port/linkagg of a
server cluster
page 5-2
OmniSwitch 10K, 6900
32
Fixed ports on second-generation Network Interface
(NI) modules.
Mirroring ports.
All high availability VLAN configuration commands
with the high availability VLAN prefix support prefix
recognition.
See the "Using the CLI" chapter in the OmniSwitch
AOS Release 7 Switch Management Guide for more
information.
Command
server-cluster
server-cluster
server-cluster mac-address
server-cluster ip
server-cluster port
server-cluster linkagg
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring High Availability VLANs
Default Value/Comments
admin-state - enable
mode - L2
None
IP address is configurable only
for L3 clusters.
None
June 2013