Switch Health Overview - OmniSwitch os6900 Network Configuration Manual

Diagnosing Switch Problems

Switch Health Overview

The following sections detail the specifications, defaults, and quick set up steps for the switch health
feature. Detailed procedures are found in
Switch Health Specifications
Platforms Supported
Health Functionality Supported
Monitored Resource Utilization Levels
Resource Utilization Raw Sample Values Saved for previous 60 seconds.
Resource Utilization Current Sample
Values
Resource Utilization Maximum
Utilization Value
Utilization Value = 0
Utilization Value = 1
Percentage Utilization Values
Resource Threshold Levels
Rising Threshold Crossing
Falling Threshold Crossing
Threshold Crossing Traps Supported
OmniSwitch AOS Release 7 Network Configuration Guide
"Monitoring Switch Health" on page
OmniSwitch 10K, 6900
–Switch level CPU Utilization Statistics
(percentage);
–Switch/module/port level Input Utilization
Statistics (percentage);
–Switch/module/port level Input/Output
Utilization Statistics (percentage);
–Switch level Memory Utilization Statistics
(percentage);
–Device level (e.g., Chassis/CMM)
Temperature Statistics (Celsius).
–Most recent utilization level;
–Average utilization level during last minute;
–Average utilization level during last hour;
–Maximum utilization level during last hour.
Stored.
Calculated for previous 60 seconds and stored.
Indicates that none of the resources were mea-
sured for the period.
Indicates that a non-zero amount of the resource
(less than 2%) was measured for the period.
Calculated based on Resource Measured During
Period/Total Capacity.
Apply automatically across all levels of switch
(switch/module/port).
A Resource Threshold was exceeded by its cor-
responding utilization value in the current cycle.
A Resource Threshold was exceeded by its cor-
responding utilization value in the previous
cycle, but is not exceeded in the current cycle.
Device, module, port-level threshold crossings.
June 2013
Switch Health Overview
32-41.
page 32-13