In This Chapter; Chapter 10 Configuring Multi-Chassis Link Aggregation - OmniSwitch os6900 Network Configuration Manual

In This Chapter

In This Chapter
This chapter describes the basic components of MCLAG and how to configure them through the
Command Line Interface (CLI). CLI commands are used in the configuration examples; for more details
about the syntax of commands, see the OmniSwitch CLI Reference Guide.
The following information and configuration procedures are included in this chapter:
•
"Quick Steps for Configuring MCLAG" on page 10-5
•
"MCLAG Overview" on page 10-9
•
"MCLAG Topologies" on page 10-13
•
"MCLAG Packet Flow" on page 10-18
•
"Interaction with Other Features" on page 10-21
•
"Configuring MCLAG" on page 10-27
•
"MCLAG Configuration Examples" on page 10-35
•
"Displaying MCLAG Configuration and Statistics" on page 10-38
page 10-2 OmniSwitch AOS Release 7 Network Configuration Guide
Configuring Multi-chassis Link Aggregation
June 2013