Configuring Universal Network Profiles
As shown in the following show unp user command example, the "Learning Source" field displays
"Local" or "Remote" to indicate on which multi-chassis peer switch the device MAC address was learned:
-> show unp user
Total users: 3
Port Username
----+-----------------+-----------------+---------+-----+-------+-------+----------
1/1
00:00:00:00:00:01 00:00:00:00:00:01 10.0.0.1
0/10 00:80:df:00:00:04 00:80:df:00:00:04 30.0.0.5
0/11 00:80:df:00:00:05 00:80:df:00:00:05 40.0.0.5
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
OmniSwitch AOS Release 7 Network Configuration Guide
User
Mac address
IP
June 2013
Verifying the UNP Configuration
Vlan
UNP
Status
10
Sales
Active
30
-
Block
30
-
Active
Learning
Source
Local
Remote
Local
page 27-45