Displaying Source Learning Information
Displaying Source Learning Information
To display MAC Address Table entries, statistics, and aging time values, use the show commands listed
below:
show mac-learning
show mac-learning aging-time
show mac-learning mode
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide.
page 3-10
Displays a list of all MAC addresses known to the MAC address
table, including static and multicast MAC addresses.
Displays the current MAC address aging timer value by switch or
VLAN.
Displays the current status of the distributed MAC source learning
mode.
OmniSwitch AOS Release 7 Network Configuration Guide
Managing Source Learning
June 2013