Modifying The Partner Port Administrative Status; Modifying The Partner Port Priority - OmniSwitch os6900 Network Configuration Manual

Configuring Dynamic Link Aggregation
Restoring the Partner Port System Priority
To remove a user-configured system priority from a dynamic aggregate group partner port configuration
use the no form of the
slot number, a slash (/), the port number, and partner admin-system-priority.
For example, to remove a user-configured system ID from dynamic aggregate partner port 3 in slot 4,
enter:
-> no linkagg lacp port 4/3 partner admin-system-priority

Modifying the Partner Port Administrative Status

By default, the administrative status of a dynamic aggregate group partner port is 0. The following subsec-
tions describe how to configure a user-specified value and how to restore the value to its default value
with the linkagg lacp port partner admin-port
Configuring the Partner Port Administrative Status
You can configure the administrative status of a dynamic aggregate group partner port by entering link-
agg lacp port, the slot number, a slash (/), the port number, partner admin-port, and the user-specified
partner port administrative status.
For example, to modify the administrative status of dynamic aggregate partner port 1 in slot 7 to 200 you
would enter:
-> linkagg lacp port 7/1 partner admin-port 200
For example, to modify the administrative status of dynamic aggregate
partner port 1 in slot 7 to 200, enter:
-> linkagg lacp port 7/1 partner admin-port 200
Restoring the Partner Port Administrative Status
To remove a user-configured administrative status from a dynamic aggregate group partner port
configuration use the no form of the
linkagg lacp agg, the slot number, a slash (/), the port number, and partner admin-port.
For example, to remove a user-configured administrative status from dynamic aggregate partner port 1 in
slot 7 you would enter:
-> no linkagg lacp port 7/1 partner admin-port

Modifying the Partner Port Priority

The default partner port priority is 0. The following subsections describe how to configure a user-specified
value and how to restore the value to its default value with the
priority command.
Configuring the Partner Port Priority
To configure the partner port priority, enter lacp agg, the slot number, a slash (/), the port number, part-
ner admin-port priority, and the user-specified partner port priority.
For example, to modify the port priority of dynamic aggregate partner port 3 in slot 4 to 100 you would
enter:
-> linkagg lacp port 4/3 partner admin-port priority 100
OmniSwitch AOS Release 7 Network Configuration Guide
linkagg lacp agg partner system-priority
linkagg lacp port partner admin-port
Modifying Dynamic Link Aggregate Group Parameters
command by entering lacp port, the
command.
linkagg lacp port partner admin port-
June 2013
command by entering no
page 8-25