Sflow Overview - OmniSwitch os6900 Network Configuration Manual

Diagnosing Switch Problems

sFlow Overview

The following sections detail the specifications, defaults, and quick set up steps for the sFlow feature.
Detailed procedures are found in
sFlow Specifications
RFCs Supported
Platforms Supported
Receiver/Sampler/Polling Instances
Sampling
Polling
Agent IP Address
sFlow Defaults
The following table shows sFlow default values:
sFlow Defaults
Parameter Description
Receiver Name
Receiver Timeout Value
Receiver IP Address
Receiver Data File Size
Receiver Version Number
Receiver Destination Port
Sampler Rate
OmniSwitch AOS Release 7 Network Configuration Guide
"sFlow" on page 32-29.
3176 - sFlow
Management Information Base
OmniSwitch 10K, 6900
2
length of packet
type of frame
source and destination MACs
source and destination VLANs
source and destination priorities
source and destination IP addressessource and
destination ports
tcp flags and tos
In octets
Out octets
Number of Rx Unicast packets
Number of Tx Unicast packets
Number of Rx Multicast packets
Number of Tx Multicast packets
Number of Rx Broadcast packets
Number of Tx Broadcast packets
In Errors
Out Errors
Configurable using sflow agent ip command.
CLI Command
sflow receiver
sflow receiver
sflow receiver
sflow receiver
sflow receiver
sflow receiver
sflow sampler
June 2013
sFlow Overview
Default Value/Comments
Empty
No Timeout
0.0.0.0
1400 Bytes
5
6343
0
page 32-7