Vrf Specifications - OmniSwitch os6900 Network Configuration Manual

VRF Specifications

VRF Specifications
The VRF functionality described in this chapter is supported on the OmniSwitch 10K and OmniSwitch
6900, unless otherwise stated in the following specifications table or specifically noted within any other
section of this chapter. Note that any maximum limits provided in this table are subject to available system
resources.
Platforms Supported
OmniSwitch License Requirements
Routing Protocols Supported
Maximum number of max profile VRF
instances per switch (no low profiles)
Maximum number of low profile VRF
instances per switch (no high profiles)
Maximum VRF instances per VLAN
Maximum OSPFv2 VRF
routing instances per switch
Maximum RIPv2 VRF
routing instances per switch
Maximum BGP VRF routing instances per
switch
SNMP version required for management
VRF Defaults
Parameter Description
Active VRF instance
page 16-2
OmniSwitch 10K, 6900
Advanced License required on OmniSwitch 6900 only.
Static, IPv4, RIPv2, OSPFv2, BGP4
64
512 (OmniSwitch 10K)
128 (OmniSwitch 6900)
1
16
16
32
SNMPv3
Command
vrf
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring Multiple VRF
Default Value/Comments
Default VRF instance with
max profile capabilities
June 2013