Qos Specifications - OmniSwitch os6900 Network Configuration Manual

Configuring QoS

QoS Specifications

The QoS functionality described in this chapter is supported on the OmniSwitch 10K and OmniSwitch
6900 switches, unless otherwise stated in the following QoS Specifications table or specifically noted
within any other section of this chapter. Note that any maximum limits provided in the QoS Specifica-
tions table are subject to available system resources.
Maximum number of policy rules
Maximum number of policy conditions
Maximum number of policy actions
Maximum number of policy rules per slot
Maximum number of bandwidth policy rules
Maximum number of validity periods
Maximum number of policy services
Maximum number of groups (network, MAC, ser-
vice, port)
Maximum number of group entries
Maximum number of Class of Service (CoS)
queues per port.
Queue Set Profiles (QSP)
Weighted Random Early Detection profiles (WRP) 1 (OmniSwitch 6900)
Maximum number of QoS policy lists per switch
Maximum number of QoS policy lists per Universal
Network Profile (UNP)
CLI Command Prefix Recognition
OmniSwitch AOS Release 7 Network Configuration Guide
8192
8192
8192
1024
5120 (OS10K-XNI-U32S, OS10K-GNI-C48E,
OS10K-GNI-U48E).
2560 (OmniSwitch 10K)
512 (OmniSwitch 6900)
64
256
2048
1024 per group (512 per service group)
8
4
Not supported on the OmniSwitch 10K
32 (includes the default list)
1
Some QoS commands support prefix recognition.
See the "Using the CLI" chapter in the OmniSwitch
AOS Release 7 Switch Management Guide for more
information.
June 2013
QoS Specifications
page 25-3