Displaying Auto-Fabric Configuration And Status - OmniSwitch os6900 Network Configuration Manual

Displaying Auto-Fabric Configuration and Status

Displaying Auto-Fabric Configuration and Status
You can use Command Line Interface (CLI) show commands to display the current configuration and
status of auto-fabric. These commands include the following:
show auto-fabric config
show auto-fabric config interface
For more information about the output details that result from these commands, see the OmniSwitch CLI
Reference Guide.
page 14-16
Displays details about the globally configured and operational
parameters.
Displays details about the interface configured and operational
parameters.
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring Dynamic Automatic Fabric
June 2013