Chapter 16 Configuring Multiple Vrf - OmniSwitch os6900 Network Configuration Manual

16 Configuring Multiple VRF
Multiple Virtual Routing and Forwarding (VRF) provides a mechanism for segmenting Layer 3 traffic into
virtual routing domains (instances) on the same switch. Each routing instance independently maintains its
own routing and forwarding table, peer, and interface information.
In This Chapter
This chapter describes the Multiple VRF feature and how to configure it through the Command Line
Interface (CLI). CLI commands are used in the configuration examples; for more details about the syntax
of commands, see the OmniSwitch CLI Reference Guide. This chapter provides an overview of Multiple
VRF and includes the following information:
•
"VRF Specifications" on page
•
"VRF Defaults" on page
•
"Quick Steps for Configuring Multiple VRF" on page
•
"Multiple VRF Overview" on page
•
"VRF Interaction With Other Features" on page
•
"Configuring VRF Instances" on page
•
"Verifying the VRF Configuration" on page
OmniSwitch AOS Release 7 Network Configuration Guide
16-2.
16-2.
16-6.
16-11.
16-14.
16-19.
16-3.
June 2013 page 16-1