MIMAKI JV150-130 Operation Manual page 58

Chapter 3 Mchine setting
Set the server
1
Press the
times)
• MACHINE SETUP MENU will be displayed.
2
Press the
3
Press
and press the
4
Press 4 times, and press the
key.
• "SERVER SETUP" will be selected.
5
Press the
• "SMTP ADDRESS" will be selected.
6
Press
Address, and press the
• Press the jog key [][][][] to set SMTP
address.
• Input the SMTP address name.
7
Press , and press the
• "SMTP PORT No." will be selected.
8
Press
press the
• Set the SMTP port number.
9
Press , and press the
• "SENDER ADDRESS" will be selected.
10
Press
ADDRESS, and press the
• Press [][][][] and set the e-mail address to
be used as the sender mail address.
• Set it with alphanumeric characters and symbols
within 64 characters.
• Depending on your server, if you do not
set the e-mail address not supporting the
account, sending/ receiving e-mails may
be unavailable.
11
Press , and press the
• "AUTHENTICATION" will be selected.
12
Press
method, and press the
• Set the authentication method of the SMTP
server.
• When you select [OFF], proceed to the Step 20.
13
Press , and press the
• "USER NAME" will be selected.
14
Press
Name, and press the
• Press [][][][] to set the user name to use
for the authentication.
• Set it with alphanumeric characters and symbols
within 30 characters.
3-20
(MENU) (twice
key in LOCAL.
(>>) .
to select "EVENT MAIL",
key.
key.
to set SMTP
key.
key.
to set SMTP Port No., and
key.
key.
to set SENDER
key.
key.
to set authentication
key.
key.
to set User
key.
15
Press , and press the
• "PASSWORD" will be selected.
16
Press
Word, and press the
• Press [][][][] to set the password to use for
the authentication.
• Set it with alphanumeric characters and symbols
within 15 characters.
• On the password setting screen, you can
only check the value that you are currently
inputting.
• When you select [POP before SMTP] in the Step
11, set the items in the Step 16 to 19.
17
Press , and press the
• "POP3 ADDRESS" will be selected.
18
Press
Address, and press the
• Press [][][][] to set POP server.
• Input the POP server name.
19
Press , and press the
• "APOP" will be selected.
20
Press to set ON/ OFF, and press
the key.
21
Press the
to end the setting.
key.
to set Pass
key.
key.
to set POP3
key.
key.
key several times