Connecting Cables; Connecting Usb2.0 Interface Cable; Connecting The Power Cable - MIMAKI JV150-130 Operation Manual

Chapter 1 Before Use

Connecting Cables

Connecting USB2.0 Interface Cable

Connect the PC and this machine with the USB2.0
interface cable.
• Your RIP must be compatible with USB 2.0.
• Contact a RIP maker near your location or our
office when the USB2.0 interface is not attached
to the PC.
Notes on USB 2.0 Interface
• Your RIP must be compatible with USB 2.0.
 When two or more JV150 BS INK MODEL
machines are connected to one personal computer
When two or more JV150 INK MODEL machines are
connected to one personal computer, the personal
computer may not recognize all the JV150 INK
MODEL machines normally.
Reconnect the unrecognized JV150 BS INK MODEL
machine to another USB port, if available, and check
to see if it is recognized.If the JV150 BS INK MODEL
machine is not recognized by the newly connected
USB port, use USB 2.0 repeater cables available on
the market.
 Notes on peripheral devices in USB high speed
mode
When a peripheral device (USB memory or USB HDD)
to be operated in USB high speed mode is connected
to the same personal computer that a JV150 BS INK
MODEL machine is connected to, the USB device
may not be recognized.
When JV150 BS INK MODEL is connected to the
personal computer to which an external HDD is
connected via USB, the speed of data output to JV150
BS INK MODEL may drop.That can cause the head
unit to stop temporarily at the right or left end during
printing.
1-8
USB cable
 Removing USB memory
If a USB memory module is inserted in the personal
computer to which a JV150 BS INK MODEL machine
is connected, click "Stop" in the "Safely Remove
Hardware" window by following the instructions given
there first and then remove the module.
Leaving a USB memory module inserted can cause
[ERROR 10 COMMAND ERROR].
Copy the data onto the hard disk before outputting it
for printing.

Connecting the power cable

1
Insert the power cable into an inlet of the
machine.
2
Secure a cable band.
• Secure the cable with the cable band attached to
this machine.
3
Insert the power plug into a plug socket.
Power plug
• Do not use any power cables other than the
attached power cable.
• Be sure to connect the power cable to the outlet
near this machine, and make sure that the power
cable can be easily removed.
• Connect the power cable to the grounded
outlet.Otherwise, it may result in fire or an electric
shock.
Inlet
Power cable
Cable band
Socket