Ink Specifications - MIMAKI JV150-130 Operation Manual

Item
Available temp.
Humidity
Guaranteed temp.
Recomended
Temperature
Environment
change
Dust
Highest operation
height
Weight
Width
Outside
Depth
dimensions
Height
*1. When "MARGIN(RIGHT/LEFT)" in the Setup menu has been set to the minimum (-10 mm).
*2. It is outside diameter and weight after take-up media.
*3. Without deflection of the roll when it is retained at both ends.
*4. Operating Condition: Full load Measuring Method: According to clause 1.7.4.2 of Machinery Directive 2006/42/EC

Ink specifications

Item
Supply
Color
Ink capacity
Shelf life
Storage
Storage tem-
perature
Transporta-
tion
• Do not disassemble ink cartridges and do not refill them with ink.
• Ink could freeze if kept in a cold place for an extended period.
• When aqueous ink is used, if the ink freezes, the quality is changed and the ink becomes unusable.
Store the ink in an environment that will not freeze the ink.
JV150-130 BS INK MODEL
20 °C to 30 °C
35 to 65% Rh (No condensation)
20 °C to 25 °C
± 10 °C / h or less
Equivalent to normal office level
2000 m
170 kg
2525mm
700mm
1392 mm
Dedicated sublimation dye ink cartridge
Black ink cartridge
Cyan ink cartridge
Magenta ink cartridge
Yellow ink cartridge
600cc per cartridge
The period is printed on the ink cartridge.
Within three months after opening the package even in the available period.
10 to 35°C (Average daily temperature)
Be sure to keep a vessel in the airtight condition.
Be sure to keep a vessel in a dry, well-ventilated, cool and dark location.
0 to 40°C
Avoid the condition lower than -0 °C and higher than 40 °C.
Chapter6 Appendix
JV150-160 BS INK MODEL
200 kg
2775mm
BS3/ BS4 ink
2
2
2
6
6-3