Air Cut-Off Valve - TGB blade 300 Service Manual

To this chapter contents
4. FUEL SYSTEM

Air Cut-Off Valve

2 screws(250C.C.) 2 screws(300C.C.)
Disassembly
Remove
2 screws.
Remove air cut-off valve cover, spring and valve.
O-ring Spring
Air cut-off valve Cover
Inspection
Check the valve is in normal.
If the valve is in normal, it will restrict air-flow.
If air-flow is no restricting, replace carburetor
assembly.
Check the vacuum pipe o-ring is in normal.
Assembly
Install in reverse order of removal procedures.
4-5
PDF created with pdfFactory Pro trial version www.pdffactory.com