Maintenance Description - TGB blade 300 Service Manual

14. FRONT BRAKE & FRONT WHEEL

Maintenance Description

Operational precautions
Caution
Inhaling asbestos may cause disorders of respiration system or cancer, therefore, never use air hose or
dry brush to clean brake parts. Use vacuum cleaner or other authorized tool instead.
● The brake caliper can be removed without removing the hydraulic system.
● After the hydraulic system is removed, or the brake system is felt to be too soft, bleed the hydraulic
system.
● While refilling brake fluid, care should be taken not to let the foreign material entering into the brake
system.
● Do not spill brake fluid on the painted surfaces, plastic or rubber parts to avoid damage.
● Check the operation of the brake system before riding.
● Please refer to the Maintenance Manual of tubeless tire in respect to the removal, repair and
installation of the tire.
Specifications
The thickness of front and rear brake disk
Front and rear brake disk eccentricity
Master cylinder inner diameter
Master cylinder piston outer diameter
Diameter of front disk
Thickness of front brake lining
Tire pressure as cold: 0.8 kg/cm² (12
Torque values
Brake hose bolts
Bolt for brake caliper
Bolts for the brake disk
Brake lever nut
Air-bleed valve
Front wheel nut
Front axle castle nut
14-2
PDF created with pdfFactory Pro trial version
To this chapter contents
Item
psi)
3.50kgf-m
3.25kgf-m
4.25kgf-m
1.00kgf-m
0.50kgf-m
2.40kgf-m
5.00kgf-m
www.pdffactory.com
Standard (mm)
3.500
< 0.100
14.000~14.043
13.957~13.984
175.000
5.500
Limit (mm)
2.000
0.300
14.055
13.945
-
2.000