TGB blade 300 Service Manual page 158

Remove 4 socket bolts, and then remove the
brake disk from wheel hub.
Installation
Install the front brake disk to the wheel hub.
Install wheel hub and brake disk on to knuckle.
Install wheel hub washer and tighten the wheel
hub nut.
.
Torque: 9.0kgf-m
Install cotter pin
Install front brake caliper.
Torque: 3.5kgf-m
PDF created with pdfFactory Pro trial version
To this chapter contents
14. FRONT BRAKE & FRONT WHEEL
Wheel hub nut
www.pdffactory.com
4 bolts
Cotter pin
2 bolts
14-5