TGB blade 300 Service Manual page 114

To this chapter contents
9. TRANSMISSION
Align the position mark on the shift spindle
Position mark
sprocket with that of shift drum, and then install
shift spindle.
Dowel pins
Install dowel pins and new gasket.
9 bolts
Install gear box cover and bolts, and tighten.
Torque value: 1.0~1.4kgf-m
Install the shift spindle bracket, drive chain protector,
speedometer gear box and gear change lever.
Add gear oil.
Gear oil quantity: 750c.c.
9-12
PDF created with pdfFactory Pro trial version www.pdffactory.com