Front Wheel; Front Wheel Hub - TGB blade 300 Service Manual

To this chapter contents
14. FRONT BRAKE & FRONT WHEEL

Front Wheel

Removal
Raise the front wheels off the ground by placing a
jack or other support under the frame.
4 screws
Remove the front wheel nuts, and then remove
front wheels.
Installation
Install the front wheel and tighten the nuts.
Torque: 5.0kgf-m
4 nuts

Front Wheel Hub

Removal
Remove front brake caliper (2 bolts).
2 bolts
Remove cotter pin, wheel hub nut and washer.
Wheel hub nut
Remove wheel hub and brake disk.
Cotter pin
14-4
PDF created with pdfFactory Pro trial version www.pdffactory.com