TGB blade 300 Service Manual page 170

To this chapter contents
15. STEERING / FRONT SUSPENSION
Loosen 2 screws, and then remove handle left
switch and choke hosing.
2 screws
4 socket bolts
Remove switch wire band.
Remove handle mounting bolt, and then remove
the handle upper holder, handle.
Remove 2 nuts to remove handle under holder
and meter bracket.
2 Nuts
Installation
Install in reverse order of removal procedures.
Torque value:
4.0kgf-m
Handlebar under holder nut
2.4kgf-m
Handlebar upper holder bolt
15-4
PDF created with pdfFactory Pro trial version www.pdffactory.com