TGB blade 300 Service Manual page 184

To this chapter contents
16. REAR BRAKE & REAR WHEEL & REAR CUSHION
Installation
Install rear wheel axle and driven sprocket holder.
Driven sprocket holder
Install rear brake disk bracket and disk.
Brake disk bracket
Install rear wheel axle nuts, rear axle nut fixed
plate and tighten the nuts.
Torque: 9.2kgf-m
Special tool:
Rear axle nut wrench (55mm)
Rear axle nut torque wrench
Torque wrench
After tightened the axle nut, bend the rear axle nut
Fixed plate
fixed plate.
16-8
PDF created with pdfFactory Pro trial version www.pdffactory.com