TGB blade 300 Service Manual page 79

Install cam chain on to sprocket and align the
timing mark on the sprocket with that of cylinder
head.
Align sprocket bolt hole with camshaft bolt hole.
Tighten the sprocket mounting bolts.
Caution
Make sure timing marks are matched.
Install cylinder head side cover (3 bolts).
Install thermostat (2 bolts).
Loosen auto tensioner adjustment bolt and
remove bolt and spring.
Install tensioner and install spring and adjustment
bolt.
Install cylinder cover (4 bolts).
PDF created with pdfFactory Pro trial version
To this chapter contents
6. CYLINDER HEAD/VALVE
2 bolts
3 bolts
Tensioner adjustment bolt
4 bolts
www.pdffactory.com
Timing mark
Thermostat bolts
6-15