Disassembly Of Crankcase - TGB blade 300 Service Manual

Disassembly of crankcase

Remove the cam chain setting plate, and then
remove cam chain.
Loosen the pivot bolt and remove the tensioner.
Loosen 2 bolts on the right crankcase.
Loosen 11 bolts on the left crankcase.
Place right crankcase downward and left
crankcase up.
Tap the left crankcase with a plastic hammer to
remove it.
Caution
Care should be taken not to damage the contact
surfaces.
PDF created with pdfFactory Pro trial version
To this chapter contents
Tensioner
11 bolts
www.pdffactory.com
11. CRANKCASE / CRANK
Cam chain setting plate
2 bolts
11-3