Network - Qvis I-ZEUS-HYBRID1 User Manual

16 channel analogue / ip hybrid dvr
Table of Contents

Advertisement

5.7.3 Network

The single network adapter interface is shown as in Figure-5-24 and the dual network
adapters interface is shown as in Figure 5-25.
Network Mode: Includes multiple access, fault tolerance, and load balancing.
o
Multiple-address mode: eth0 and eth1 operate separately. You can use the services such
as HTTP, RTP service via etho0 or the eth1. Usually you need to set one default card
(default setup is etho) to request the auto network service form the device-end such as
DHCP, email, FTP and etc. In multiple-address mode, system network status is shown as
offline once one card is offline.
o
Network fault-tolerance: In this mode, device uses bond0 to communicate with the
external devices. You can focus on one host IP address. At the same time, you need to set
one master card. Usually there is only one running card (master card).System can enable
alternate card when the master card is malfunction. The system is shown as offline once
these two cards are both offline. Please note these two cards shall be in the same LAN.
o
Load balance: In this mode, device uses bond0 to communicate with the external device.
The eth0 and eth1 are both working now and bearing the network load. Their netwo rk load
are general the same. The system is shown as offline once these two cards are both offline.
Please note these two cards shall be in the same LAN.
Default Network Card: Please select eth0/eth1/bond0(optional) after enabling the multiple-
access function
Main Network Card: Please select eth0/eth1 (optional) after enabling the multiple access
function.
IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two IP
address format and you can access via them.
MAC address: The host in the LAN can get a unique MAC address. It is for you to access in the
LAN. It is read-only.
IP address: Here you can use up/down button () or input the corresponding number to
input IP address. Then you can set the corresponding subnet mask the d efault gateway.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-23
75

Advertisement

Table of Contents
loading

Table of Contents