Table of Contents
Advertisement
Please refer to the following sheet for detailed information:
Parameter
Enable
Period
Anti-dither
Sensitivity
Region
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-40
Figure 7-41
Function
You need to check the box to enable motion detection function.
Please select a channel from the dropdown list.
Motion detection function becomes activated in the specified
periods. See Figure 7-39.
There are six periods in one day. Please draw a circle to enable
corresponding period.
Click OK button, system goes back to motion detection interface,
please click save button to exit.
System only memorizes one event during the anti-dither period.
The value ranges from 5s to 600s.
There are six levels. The sixth level has the highest sensitivity.
There are six levels. The sixth level has the highest sensitivity.
Region: If you select motion detection type, you can click this
button to set motion detection zone. The interface is shown as in
151
Advertisement
Table of Contents
