Qvis I-ZEUS-HYBRID1 User Manual page 108

Click the Manual Add button; you can go to the following interface. See Figure 5-19.
Channel number：The dropdown list here displays unconnected channel number. You can go to
Figure 5-18 to set remote channel connection.
Please note:

System default IP address is 192.168.0.0 if you do not input IP address. System will not add
current IP address.

You can not add two or more devices in the Manual Add interface (Figure 5-19). Click OK
button, system connects to the corresponding front-end device of current channel on the
interface.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-18
Figure 5-19
99