Network - Qvis TERMINATOR G620 User Manual

The 'Network' menu has 7 sub menus:
• DHCP/MANUAL
• DNS
• WAN Access - Port Forwarding
• DDNS Settings
• Time Server
• Email Settings
• Configure Alarm Receiving Center (ARC)
DHCP/MANUAL
This allows you to configure your network settings.
Status:
Configure:
IP Address:
Subnet Mask:
Gateway:
Ethernet Speed: This shows the speed of the NVR's network connection.
Click 'Accept Changes' to confirm selections. Click 'Reject Changes' to cancel selections.
Manual updated February 2016
Settings

Network

Displays the status of the network connection.
Use this drop down menu to select how the network connection will
be configured 'Using DHCP' or 'Manually'. If you know your desired IP
address then it is recommended that you select 'Manually' and insert it
into the IP Address bar.
Displays the NVR's IP Address.
Displays the NVR's Subnet Mask.
Displays the Gateway IP Address.
© Copyright Qvis Labs. All software and documentation rights reserved.
45