Qvis I-ZEUS-HYBRID1 User Manual page 17

Remote control
ACT
indication light
Status indication
Status
light
Power indication
PWR
light
Record light 1-32
IR Receiver IR
© Copyright Qvis ®. All documentation rights reserved.
Remote control indication light
If there is Fn indication light, current status indication light is null.
Power indication light
For 4/8/16-channel series
It becomes on when system is recording.
For 32-channel series
When the light flashes slowly, it means the corresponding
channel of 1-16 channel is recording now.
When the light flashes fast, it means the corresponding channel
of 17-32 channel is recording now. When the light becomes on,
It means the corresponding 2-channel is recoding now.
It is to receive the signal from the remote control.
8