Qvis I-ZEUS-HYBRID1 User Manual page 94

After successfully connection, you can see the following interface. You can see it is connected now.
See Figure 5-38.

WIFI working status: Here you can view current connection status.
Please note:

After successful connection, you will see the WIFI connection icon at the top right corner of the
preview interface.

When the hotspot verification type is displayed as WEP, system displays as AUTO since the
device can not detect its encryption type.

System does not support verification type WPA and WPA2. The display may become abnormal
for the verification type and encryption type.
After device successfully connected to the WIFI, you can view the hotspot name, IP address, subnet
mask, default gateway and etc. See Figure 5-39.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-37
Figure 5-38
85